

Not everyone has a passport.
Not everyone has a passport.
Depending on your setting and desired outcome for the poisoner, uraninite (aka pitchblende) might be an option. It has historical uses in glass making and pottery glazing, which could provide justification for why someone would have it.
It contains Uranium, which is radioactive, but I don’t believe will bioaccumulate, but can build up on surfaces, tools, and clothing providing a source of long-term radiation exposure. In addition, it contains lead, which does bioaccumulate, providing a source of gradual long term poisoning as well as radium which also bioaccumulates and is radioactive, providing an additional source of longterm radiation exposure.
Calibre cant natively strip DRM from ebooks, but there are third-party plugins for it that can and integrate pretty seamlessly into the process of adding the book to your library.
I used it to strip the DRM from all of my Amazon bought ebooks back before they removed the download option.
“I’ll have you know there’s no pusseeee!”
I think it depends more on your instructor rather than the region you’re in. When I was in HS I took two years of Spanish and our teacher was from Spain, so her instruction was in line with that.
Or scripts for basically any other variant of the Bourne shell. They are, for the most part, very cross compatible.
Might be a bit late on this, but ProxMox doesn’t really handle assigning threads to the e/p cores. That’s handled by the kernel and as long you’re running kernel version 6.1 or greater you should be good on that front.
If you really need to, you can also pin specific VMs to specific cores. So that if you’ve got something that always needs the performance it can always run on the p-cores and things that aren’t as demanding can always run on e-cores.
That said, especially if you’re over provisioning, it’s probably better to let the scheduler in the kernel handle thread assignments.
If I’m reading your example right, I don’t think that would satisfy three either. Three copies of the data on the same filesystem or even the same system doesn’t satisfy the “three backups” rule. Because the only thing you’re really protecting against is maybe user error. I.e. accidental deletion or modification. You’re not protecting against filesystem corruption or system failure.
For a (little bit hyperbolic) example, if you put the system that has your live data on it through a wood chipper, could you use one of the other copies to recover your critical data? If yes, it counts. If no, it doesn’t.
Snapshots have the same issue, because at the root a snapshot is just an additional copy of the data. There’s additional automation, deduplication, and other features baked into the snapshot process but it’s basically just a fancy copy function.
Edit: all of the above is also why the saying “RAID is not a backup” holds true.
I don’t think this meets the definition of 3-2-1. Which isn’t a problem if it meets your requirements. Hell, I do something similar for my stuff. I have my primary NAS backed up to a secondary NAS. Both have BTRFS snapshots enabled, but the secondary has a longer retention period for snapshots. (One month vs one week). Then I have my secondary NAS mirrored to a NAS at my friends house for an offsite backup.
This is more of a 4-1-1 format.
But 3-2-1 is supposed to be:
Three total copies of the data. Snapshots don’t count here, but the live data does.
On two different types of media. I.e. one backup on HDD and another on optical media or tape.
With at least one backup stored off site.
I can’t speak to AI performance, but given you’re stated goal of lower idle power consumption, I’d go with the 14900K, not the KS as you have listed.
Reason being the $250 price difference between the two, when the KS is just a slightly higher binning of the K with an additional 200MHz on the boost clocks. With that higher boost being something you’re unlikely to practically see without a substantial and robust cooling system, I don’t think it’s worth the extra money.
The reason I’d go with the K over the 10940X is the lower limit on it’s power consumption. The E cores are very efficient and can down clock substantially meaning it idles at really low power. The 10940X doesn’t have that benefit.
Beyond that, I’d say look at IPC, per thread, per max sustainable clock of each core, to get a general out look on performance.
Note: all of the above assumes we’re working within your listed options. My actual recommendation would be an AMD 7800x3d or 9800x3d.
I think the word you’re looking for is “racist.”
Is there a link to the code? I know I could probably search for it, but if you’re going post about the code being public you could at least include a link to it.
In my experience “soldier” is fine. Just don’t call a Marine a Sailor.
Nah, WoW. Off the company RAID.
Ah, it’s one of those. I was thinking it was the TV’s OS.
I don’t have a lot of experience with those smaller dongles, but as I understand it they’re fairly low power devices that are more meant for streaming relatively low bitrate media from the internet or from a phone. It may not have the horsepower for playing back high bitrate media from Jellyfin or Plex.
Others may have a solution that’ll work for that device, but my gut response is to say you should consider replacing it with something more powerful.
Unless you have a commitment to only using open source software, I’d recommend Plex over Jellyfin. Mostly because I’ve found the client software for Jellyfin to be lacking, especially on AppleTV.
For the issues with the GoogleTV, you mention that it’s on WiFi, would it be possible to use a wired connection or get another set top box for it? Some TVs have the WiFi antenna behind the screen causing interference, so even though other devices get a strong signal the TV doesn’t.
Also, how’s the hardware on your server? Is the CPU powerful enough or do you have a GPU for transcoding? Also, is the server on WiFi or wired?
It’s worth noting that a lot of settop boxes have limited codec support, which might be forcing transcoding even if everything should otherwise support direct play.
That looks useful, I might host that. Does anyone have an RSS feed of at risk data?
The equation to determine watts is P=VA
If you have the same voltage and a higher amperage, then by definition you have a higher wattage.
In most jurisdictions battery involves touching someone while assault is the threat of immediate danger.
Technically, it’s not true double taxation, as you can deduct the taxes you paid in your host country from your American income tax.
It’s still shitty, but you ultimately only wind up paying the greater amount of the two tax rates.